Temperature & Humidity Data Loggers

Wireless Range (Distance):
Up to 300 feet NLOS (Non-Line-of-Sight)
1000 feet LOS (Line-of-Sight)

Notes:
The WH120 Logger reads temperature and humidity conditions and sends data back to the Receiver at regular intervals.

Data is stored in each remote sensor so loss of wireless connection does not result in loss of recorded values.

Sample Interval:
User Selectable from 30 Seconds to 15 Minutes in 1 Second Intervals

Transmissions Frequency:
User Selectable: 5, 10 or 15 minute intervals

Power:
2 AA Batteries

Alarm Type:
Displays Alarm Conditions in Wizard Software: High/Low Alarm, Low Battery, Calibration Due, Lost Communication; Pop-up Notification

Battery Life (Avg):
1-Year at 5-Minute Sample Rate and 15 Minute Transmission Frequency

Channels:
2 (Temperature/Humidity)

Data Capacity:
1728 (864 per channel) - Data stored on Logger only when communications fail.

Download Type:
Wireless

Humidity Range:
0 to 95% RH (Non condensing)

Humidity Accuracy:
+/-2% RH 0 to 60%; +/-3% 60 to 95%

Humidity Sensor:
Digital Temperature/RH Sensor

Temperature Range:
-22 to 122F
-30 to 50C

Temperature Accuracy:
+/-1.2F from +20 to 122F; +/-1.8 remaining

Temperature Sensor:
Digital Temperature/RH Sensor

Software Features:
Logged data written to database upon transmission.
View multiple loggers on single graph.
View multiple graphs simultaneously.
Quick and easy export of graphs and logged data to Excel.
View logger status of all loggers in one easy table.

Software Required:
Dickson Wizard Software (Included with WR100)

Wireless Range:
Up to 300 ft. NLOS
1000 ft. LOS

Radio Frequency:
900 MHz range (902 to 928 MHz)

Signal Strength:
Min +27 dBm (50mW)

Output Signal:
4800 Baud Serial Data

Ambient Operating Conditions:
-22 to 122F (-30 to 50C); 0 to 95% RH non-condensing

Approvals:
RHOS, FCC Part 15 Compliant(Pending)

Software PC Requirements:
Approved for MS Windows XP

Power Status Indicator:
Red LED: Blinks Red 3x when powered on. Blinks Red 1x when taking a reading and 2x when sending or Looking for Signal.

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Response Time:
30 Seconds to 63% FS

Resolution:
Logger: 0.1 Deg.

Antenna:
User Replaceable Fully Articulating

Enclosure:
Black; ABS Plastic Clam Shell

Mounting:
Free Standing or Wall Mount with Keyhole

Dimensions (Inches/cm):
3.4" x 3.4" x 1.2" (8.6 x 8.6 x 3.0cm)

Weight:
6.2oz (175g)

Units / Pkg:
1

Included Accessories:
2AA Batteries, Manual

Calibration:
Factory: NIST Calibration

A.K.A.:
Wireless, Wireless Logger, Dickson Logger, Dickson Wireless, Wireless Monitoring, Temperature, Temperature Logger, Temperature Monitoring, Humidity, Humidity Monitoring, Humidity Logger,

Key Features:
1. Easy to setup and use

2. Cost efficient

3. Real-time alarms of out-of-range conditions right at your workstation

Alarm:
Yes

Accessories:
WR100 Wireless Wizard Receiver & Software
WA100 Wireless Wizard Repeater
WS100 Wireless Wizard Signal Sensor

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Wireless Range (Distance):
Up to 300 feet NLOS (Non-Line-of-Sight)
2 Miles LOS (Line-of-Sight)

Wireless Range:
Up to 300 Ft. NLOS
2 miles LOS

Radio Frequency:
900 MHz range (902 to 928 MHz)

Signal Strength:
Min +27 dBm (50mW)

Output Signal:
4800 Baud Serial Data

Ambient Operating Conditions:
-22 to 122F (-30 to 50C); 0 to 95% RH non-condensing

Approvals:
RHOS, FCC Part 15 Compliant(Pending)

Power:
120V AC Adapter

Power Source:
Input: AC100-240 0.5V 60/50Hz
Output: DC5V, 2.0A

Power Cord:
6 Feet

Battery Backup:
2 AA - Soft Shutdown Only

Software PC Requirements:
Approved for MS Windows, XP (PC must have an available USB port).

Power Status Indicator:
Red/Green LED: Green=Sending or Looking for Signal, Red = Powered On

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Antenna:
User Replaceable Fully Articulating

USB Cable Connection:
Male Series A plug to 5 pin male series B mini plug

USB Cable Length:
6 Feet

Enclosure:
Black; ABS Plastic Clam Shell

Mounting:
Free Standing or Wall Mount with Keyhole

Dimensions (Inches/cm):
3.6" x 3.6" x 1.5" (9.1 x 9.1 x 3.8cm)

Weight:
4.7oz (133.6g)

Units / Pkg:
1

Included Accessories:
Wizard Software CD, USB Cable, AC Adapter, 2AA Batteries, Manual

IP Rating:
20

A.K.A.:
Wireless, Wireless Logger, Dickson Logger, Dickson Wireless, Wireless Monitoring, Temperature, Temperature Logger, Temperature Monitoring, Humidity, Humidity Monitoring, Humidity Logger,

Key Features:
1. Easy to setup and use

2. Cost efficient

3. Real-time alarms of out-of-range conditions right at your workstation

Download Type:
Receiver and Wizard Software

Accessories:
WS100 Wireless Wizard Signal Sensor
WA100 Wireless Wizard Repeater

Wireless Range (Distance):
Up to 300 feet NLOS (Non-Line-of-Sight)
2 Miles LOS (Line-of-Sight)

Wireless Range:
Up to 300 Ft. NLOS
2 miles LOS

Radio Frequency:
900 MHz range (902 to 928 MHz)

Signal Strength:
Min +27 dBm (50mW)

Output Signal:
4800 Baud Serial Data

Ambient Operating Conditions:
-22 to 122F (-30 to 50C); 0 to 95% RH non-condensing

Approvals:
RHOS, FCC Part 15 Compliant(Pending)

Power:
120V AC Adapter

Power Source:
Input: AC100-240 0.5V 60/50Hz
Output: DC5V, 2.0A

Power Cord:
6 Feet

Battery Backup:
2 AA, Soft Shutdown Only

Power Status Indicator:
Red/Green LED: Green=Sending or Looking for Signal, Red = Powered On

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Antenna:
User Replaceable Fully Articulating

Enclosure:
Black; ABS Plastic Clam Shell

Mounting:
Free Standing or Wall Mount with Keyhole

Dimensions (Inches/cm):
3.6" x 3.6" x 1.5" (9.1 x 9.1 x 3.8cm)

Weight:
4.7oz (133.6g)

Units / Pkg:
1

Included Accessories:
AC Adapter, 2AA Batteries, Manual

IP Rating:
20

A.K.A.:
Wireless, Wireless Logger, Dickson Logger, Dickson Wireless, Wireless Monitoring, Temperature, Temperature Logger, Temperature Monitoring, Humidity, Humidity Monitoring, Humidity Logger,

Key Features:
1. Easy to setup and use

2. Cost efficient

3. Extend the range of your network several times with just a couple Receivers

Download Type:
Repeater

Accessories:
WR100 Wireless Wizard Receiver & Software
WS100 Wireless Wizard Signal Sensor

Wireless Range (Distance):
Up to 300 feet NLOS (Non-Line-of-Sight)
2 Miles LOS (Line-of-Sight)

Display:
Backlit Display, WS100 Power Status, Unit Type Found, Unit ID, Signal Strength

Display Dimensions:
1.7" x 1.15" (4.3 x 2.9cm)

Display Update Rate:
Continuous

Keypad Functions:
On/Off, Page Up, Page Down

Power:
2 AA Batteries

Battery Life (Avg):
6-Months

Wireless Range:
Up to 300 Ft. NLOS
2 miles LOS

Radio Frequency:
900 MHz range (902 to 928 MHz)

Output Signal:
4800 Baud Serial Data

Ambient Operating Conditions:
0 to 122F (-18 to 50C); 0 to 95% RH non-condensing

Approvals:
RHOS, FCC Part 15 Compliant(Pending)

Power Status Indicator:
Display with Battery Power Status Symbol

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Antenna:
User Replaceable

Enclosure:
Hand Held; Black; ABS Plastic Clam Shell

Dimensions (Inches/cm):
4.5" x 3.0" x 1" (11.4 x 7.6 x 2.5cm)

Weight:
6.3oz (177g)

Units / Pkg:
1

Included Accessories:
2AA Batteries, Manual

A.K.A.:
Wireless, Wireless Logger, Dickson Logger, Dickson Wireless, Wireless Monitoring, Temperature, Temperature Logger, Temperature Monitoring, Humidity, Humidity Monitoring, Humidity Logger,

Key Features:
1. Easy to setup and use

2. Cost efficient

3. Real-time alarms of out-of-range conditions right at your workstation

Download Type:
Signal Sensor

Accessories:
WA100 Wireless Wizard Repeater
WR100 Wireless Wizard Receiver & Software

User Selectable Temperature Ranges:
0 to +100F, 0 to +50F/C, -10 to +40C

Temperature Range:
0 to +100F
0 to 50F/C
-10 to 40C

Temperature Accuracy:
±0.8F (±0.5C) from +20 to +122F; ±1.8F (±1C) remaining

Temperature Sensor:
Digital Temperature Humidity Sensor

Humidity Range:
0 to 95% RH

Humidity Accuracy:
±2% from 0 to 60%, ±3% from 60 to 95%

Humidity Sensor:
Digital Temperature Humidity Sensor

Sample Storage Rate:
Time graph interval options: 10 sec; 20 sec, 30 sec, 40 sec, 1 min, 2 min, 3 min (user selectable)

Time Samples Displayed:
Sample Rate/Time: 10 sec/45.8 min; 20 sec/1.5 hrs; 30 sec/2.3 hrs; 40 sec/3 hrs, 1 min/4.5hrs; 2 min/9.1 hrs; 3 min/13.7 hrs

Download Type:
USB (1:15 minutes) or FLASH Memory Card (36 seconds)

Alarm Type:
Audio/visual; High/low and low battery conditions

Ambient Operating Conditions:
Logger: 0 to 122F (-17.8 to 50C), 0 to 95% RH (non-condensing, dependent upon display operating range

Data Capacity:
32,000 (16,000 per channel)
275 Sample Points Displayed on Graph

Power Source:
120 VAC / 60 Hz / 16 W adapter (9V battery backup)

Power Status Indicator:
LCD Display

Power Cord:
6’ (2 meters)

Battery Backup:
Yes

Battery Life (Avg):
48-hours (when on battery power display goes to sleep after 1-minute - can be reactivated with the push of any button)

Display:
LCD
4.5" x 3.4"

Display Update Rate:
Data: varies with logging interval

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
Factory: NIST Traceable

User Calibration w/ SW400:
Yes

Approvals:
CE

Software Required:
None Required, A016 or A026 optional

Units / Pkg:
1

Dimensions (Inches/cm):
7.7” x 6” x 2.2” (19.6cm x 15.3cm x 5.5cm)

Weight:
21.34oz (605g)

IP Rating:
IP20

Mounting:
Wall and Keyhole

Response Time:
1 min to 63% FS typical

Warranty:
12-Month Limited

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Key Features:
1.Large 4.5" x 2.5" graphical display
2.No software or paper charts required

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, FlatScreen Data Logger, Flat Panel LCD Logger, Graphical Display Data Logger, Dickson Data Logger, Dickson Display Logger, Dickson FH, Datalogger, Temperature and Humidity Data Logger, Digital Display Logger, Temperature and Humidity Logger, Data Environment Logger, Remote Probe Data Logger, Remote Probe Logger, Two Channel Data Logger, Temperature Humidity Data Logger, Datalogger

Alarm:
Yes

RH Accuracy:
±2%

Temp. Accuracy:
±0.8F

Accessories:
R007 9V Battery
A210 Removeable FLASH Storage Device
A220 Card Reader Kit - Includes USB Memory Card Reader and One Flash Memory Card.
SW400 Logger Calibration Software
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A016 DicksonWare™ Software USB Download Cable
A867 Probe Dust Filter
R157 AC Adapter
R065 Universal International AC Adapter

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

User Selectable Temperature Ranges:
0 to +100F, 0 to +50F/C, -25 to +125F, -40 to +60F/C, -20 to +80F/C, 50 to +100F, -40 to +160F

Temperature Range:
0 to 100F
0 to 50F/C
-25 to 125F
-40 to 60F/C
-20 to 80F/C
50 to 100F
-40 to 160F

Temperature Accuracy:
±0.8F (±0.7C) from +20 to +120F; ±1.8F (±1C) remaining

Temperature Sensor:
Digital Temperature Humidity Sensor

Humidity Range:
0 to 95% RH

Humidity Accuracy:
±2% from 0 to 60%, ±3% from 60 to 95%

Humidity Sensor:
Digital Temperature Humidity Sensor

Sample Storage Rate:
Time graph interval options: 10 sec; 20 sec, 30 sec, 40 sec, 1 min, 2 min, 3 min (user selectable)

Time Samples Displayed:
Sample Rate/Time: 10 sec/45.8 min; 20 sec/1.5 hrs; 30 sec/2.3 hrs; 40 sec/3 hrs, 1 min/4.5hrs; 2 min/9.1 hrs; 3 min/13.7 hrs

Download Type:
USB (1:15 minutes) or FLASH Memory Card (36 seconds)

Alarm Type:
Audio/visual; High/low and low battery conditions

Ambient Operating Conditions:
Logger: 0 to 120F (-17.8 to 48.9C), 0 to 95% RH (non-condensing, dependent upon display operating range); Probe: -40 to +185F (-40 to +85C), 0 to 95% RH (non-condensing)

Data Capacity:
32,000 (16,000 per channel)
275 Sample Points Displayed on Graph

Power Source:
120 VAC / 60 Hz / 16 W adapter (9V battery backup)

Power Status Indicator:
LCD Display

Power Cord:
6’ (2 meters)

Battery Backup:
Yes

Battery Life (Avg):
48-hours (when on battery power display goes to sleep after 1-minute - can be reactivated with the push of any button)

Display:
LCD
4.5" x 3.4"

Display Update Rate:
Data: varies with logging interval

Remote Probe Dimensions:
.5" dia. X 1.5" long on a 10 ft. cord (1.25cm x 4.5xm long on a 24.9cm cord)

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
Factory: NIST Traceable

User Calibration w/ SW400:
Yes

Approvals:
CE

Software Required:
None Required, A016 or A026 optional

Units / Pkg:
1

Dimensions (Inches/cm):
7.7” x 6” x 2.2” (19.6cm x 15.3cm x 5.5cm)

Weight:
21.34oz (605g)

IP Rating:
IP20

Mounting:
Wall and Keyhole

Response Time:
1 min to 63% FS typical

Warranty:
12-Month Limited

Storage Conditions:
-22 to 158F (-30 to 70C); 0 to 95% RH non-condensing

Key Features:
1.Remote probe
2.Large 4.5" x 2.5" graphical display
3.No software or paper charts required

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, FlatScreen Data Logger, Flat Panel LCD Logger, Graphical Display Data Logger, Dickson Data Logger, Dickson Display Logger, Dickson FH, Datalogger, Temperature and Humidity Data Logger, Digital Display Logger, Temperature and Humidity Logger, Data Environment Logger, Remote Probe Data Logger, Remote Probe Logger, Two Channel Data Logger, Temperature Humidity Data Logger, Datalogger

Alarm:
Yes

Remote Probe:
Yes

RH Accuracy:
±2%

Temp. Accuracy:
±0.8F

Accessories:
R007 9V Battery
A210 Removeable FLASH Storage Device
A220 Card Reader Kit - Includes USB Memory Card Reader and One Flash Memory Card.
SW400 Logger Calibration Software
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A016 DicksonWare™ Software USB Download Cable
A015 DicksonWare™ Software Serial Download Cable
A867 Probe Dust Filter
R157 AC Adapter
R065 Universal International AC Adapter

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Temperature Range:
-10 to 176F
-23 to 80C

Temperature Accuracy:
±0.8F (±0.5C) over range 0 to +158F (-17 to +70C), ±2F (±1C) at -10F (-23C) and at +176F (+80C)

Temperature Sensor:
Internal Digital sensor

Humidity Range:
0 - 95% RH

Humidity Accuracy:
±2% RH (non-condensing) at 73°F (23°C)

Humidity Sensor:
Monolithic RH IC Sensor

Ambient Operating Conditions:
-10 to 176F (-23 to 80C), 0 to 95% RH (non-condensing)

Data Capacity:
32000
16-bit Samples

Alarm Type:
High/Low LED - Flashes Red when High/Low Limits are met

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Power Source:
CR2450 lithium (user replaceable)

Power Status Indicator:
LED flashes green when sampling

Battery Life (Avg):
1-year

Resolution:
0.1F

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
User: zero point; Factory: zero and span, NIST traceable

User Calibration w/ SW400:
Yes

DicksonWare™ Software Minimum Version Required:
10

Software Required:
A016

DicksonWare™ PC/Software Requirements:
Microsoft Windows® 98 and up; PC w/ 486 MHz or faster microprocessor, 16 MB RAM, 1 free USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
USB male series "A" plug to 5-pin male series "B" mini plug, 6 ft. (2 meters)

DicksonWare™ Computer Interface:
USB

Software Features:
Selectable Sample Interval, F/C Selectable, Calculated Dew Point, Wrap or Stop when Full, Delayed Start, Real Time Monitoring and Much More.

Download Time:
1-minute when logger is full

Dimensions (Inches/cm):
3.1x2.1x0.9
7.9x5.4x2.2

Weight:
1.9 oz
53g

IP Rating:
IP20

Warranty:
12-Month Limited

Alarm:
Yes

Key Features:
1.One-Year Battery
2.USB Download
3.High/Low LED Alarm
4.0.8F Temperature Accuracy

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, Pro Series Data Logger, Pro Logger, Pro Data Logger, Dickson Data Logger, Dickson Logger, Dickson TP, Datalogger, Temperature and Humidity Data Logger, Temperature and Humidity Logger, Data Environment Logger, Datalogger

Download Type:
USB

CE Approved:
Yes

Temp. Accuracy:
0.8F
0.5C

RH Accuracy:
±2%

Power:
Battery

Accessories:
A124 3V for USB Pro Series CR2450
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A016 DicksonWare™ Software USB Download Cable
SW400 Logger Calibration Software
A715 Locking Wall Mount Case, Small
A061 USB Download Cable Only - 6FT

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Software Features:
User friendly DicksonWare™ software creates a graph of your data in seconds. DicksonWare™ features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap!

Humidity Range:
0 to 95% RH

Humidity Sensor:
Monolithic IC Humidity Sensor

Humidity Accuracy:
±2% RH @ 77°F (25°C)

Remote Temperature Range:
-40 to +185°F (-40 to +85°C)

Temperature Sensor:
Thermistor

Temperature Accuracy:
±0.8F (±.5C) for a temperature between +20 to +120F (-7 to +49C) ; ±1.8F (±1C) for all other temperaure ranges

Dew Point Range (Calculated):
-22 to +122°F (-30 to +50°C)

Dew Point Accuracy (Calculated):
±3.6°F (±2°C) from 30 to 95% RH

Ambient Operating Conditions:
-4 to +158°F (-20 to +70°C); 0 to 95% RH non -condensing

Download Type:
USB, Serial or Memory Card

Download Time:
1-Minute (USB); 3-Minutes (Serial)

Keypad Functions:
3 buttons with tactile feedback; Min/Max, Alarm, Download

Response Time:
1 minute to 63% of full scale, typical

Display:
Medium

Display Update Rate:
10 Seconds under battery power; 1 second under AC power.

Display Dimensions:
2.0" x 1.375"

Display Min/Max:
Yes

Resolution:
0.1° From 0.0 to 999.9; 1° over 1000

Power Source:
Batteries, 4 AA Alkaline; AC adapter - optional (Input Voltage/Current: 120VAC/60Hz/16W; Output Voltage/Current: 9VDC/1A

Power Status Indicator:
LCD Display

Input Connections:
Plugs directly into outlet; Output Connection: 3.5mm stereo plug; Length: 6 feet)

Battery Life (Avg):
6-months

Battery Backup:
Yes with optional AC Adapter

Memory:
EEPROM, Removable Flash Storage Device - stores data from 1000+ Data Loggers

Data Capacity:
32000
16-bit Samples

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 or 10 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Alarm:
Audio/Visual

Approvals:
CE

Calibration:
Standard Dickson Certificate of Calibration

User Calibration w/ SW400:
Yes

Available Calibration Options:
User: zero point, Factory: NIST traceable

Enclosure:
Polycarbonate

Mounting:
Wall mountable via keyhole slots

Remote Probe Dimensions:
Houses thermistor and RH sensor in polycarbonate plastic; 5.9" x 0.91" (15cm x 2.3cm); Cable Length: 6’ (2 meters)

Included Accessories:
Batteries, instruction manual

DicksonWare™ Software Minimum Version Required:
8.0

DicksonWare™ PC/Software Requirements:
Windows® 98, 2000, and XP; PC with 486 MHz or better microprocessor, 16MB RAM, 1 free COM (serial) port with dedicated interrupt or 1 USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
A015/A025: 9 pin female D-shell to male 2.5mm stereo plug, 6 feet; A016/A026: USB male series “A” plug to 5-pin male series “B” mini plug, 6’ (2 meters)

DicksonWare™ Computer Interface:
RS-232 serial (COM) port or USB

Units / Pkg:
1

Dimensions (Inches/cm):
4.0x3.0x1.6
10.2x7.7x3.9

Weight:
9 oz

IP Rating:
IP20

Warranty:
12-Month Limited

Key Features:
1.High/Low Alarm 2.Min/Max Display 3.High Speed USB Connectivity & Flash Memory

A.K.A.:
Data Logger, Midsize Display Data Logger, Midsize Display Logger, USB Logger, Dickson Data Logger, Dickson Display Logger, Dickson TM, Datalogger, Temperature and Humidity Data Logger, Memory Card, Alarm, Digital Display Logger, Temperature and Humidity Logger, Data Environment Logger, Flash Memory Card, Alarm, Remote Probe Data Logger, Remote Probe Logger, Two Channel Data Logger, Temperature Humidity Data Logger, Datalogger

Remote Probe:
Yes

Temperature Range:
-40 to 185F
-40 to 85C

Network Connectivity:
MP100

SD Memory Card:
Yes

RH Accuracy:
±2%

Temp. Accuracy:
0.8F
0.5C

Power:
Battery

Accessories:
A015 DicksonWare™ Software Serial Download Cable
A016 DicksonWare™ Software USB Download Cable
A025 DicksonWare™ SECURE Software and Serial Download Cable (21CFR11 compliant)
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A210 Removeable FLASH Storage Device
A220 Card Reader Kit - Includes USB Memory Card Reader and One Flash Memory Card.
SW400 Logger Calibration Software
R157 AC Adapter
A060 Serial Download Cable Only
A061 USB Download Cable Only - 6FT
R006 "AA" Alkaline battery
R065 Universal International AC Adapter
A867 Probe Dust Filter

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Software Features:
User friendly DicksonWare™ software creates a graph of your data in seconds. DicksonWare™ features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap!

Humidity Range:
0 to 95% RH

Humidity Sensor:
Monolithic IC Humidity Sensor

Humidity Accuracy:
±2% RH @ 73°F (23°C)

Temperature Range:
-4 to 158F
-20 to 70C

Temperature Sensor:
Thermistor

Temperature Accuracy:
±0.8F (±.5C) for a temperature between +20 to +120F (-7 to +49C) ; ±1.8F (±1C) for all other temperaure ranges

Dew Point Range (Calculated):
-22 to +122°F (-30 to +50°C)

Dew Point Accuracy (Calculated):
±3.6°F (±2°C) from 30 to 95% RH

Ambient Operating Conditions:
-4 to +158°F (-20 to +70°C); 0 to 95% RH non -condensing

Download Type:
USB, Serial or Memory Card

Download Time:
1 Minute(USB); 3 Minutes (Serial)

Keypad Functions:
3 buttons with tactile feedback; Min/Max, Alarm, Download

Response Time:
1 minute to 63% of full scale, typical

Display:
Medium

Display Update Rate:
10 Seconds under battery power; 1 second under AC power.

Display Dimensions:
2.0" x 1.375"

Display Min/Max:
Yes

Resolution:
0.1° From 0.0 to 999.9; 1° over 1000

Power Source:
Batteries, 4 AA Alkaline; AC adapter - optional (Input Voltage/Current: 120VAC/60Hz/16W; Output Voltage/Current: 9VDC/1A

Power Status Indicator:
LCD Display

Input Connections:
Plugs directly into outlet; Output Connection: 3.5mm stereo plug; Length: 6 feet))

Battery Life (Avg):
6-months

Battery Backup:
Yes with optional AC Adapter

Memory:
EEPROM, Removable Flash Storage Device - stores data from 1000+ Data Loggers

Data Capacity:
32000
16-bit Samples

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 or 10 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Alarm:
Audio/Visual

Approvals:
CE

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
User: zero point, Factory: NIST traceable

User Calibration w/ SW400:
Yes

Enclosure:
Polycarbonate

Mounting:
Wall mountable via keyhole slots

Included Accessories:
Batteries, instruction manual

DicksonWare™ Software Minimum Version Required:
8.0

DicksonWare™ PC/Software Requirements:
Windows® 98, 2000, and XP; PC with 486 MHz or better microprocessor, 16MB RAM, 1 free COM (serial) port with dedicated interrupt or 1 USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
A015/A025: 9 pin female D-shell to male 2.5mm stereo plug, 6 feet; A016/A026: USB male series “A” plug to 5-pin male series “B” mini plug, 6’ (2 meters)

DicksonWare™ Computer Interface:
RS-232 serial (COM) port or USB

Units / Pkg:
1

Dimensions (Inches/cm):
4.0x3.0x1.6
10.2x7.7x3.9

Weight:
9 oz

IP Rating:
IP20

Warranty:
12-Month Limited

Key Features:
1.High/Low Alarm
2.Min/Max Display
3.High Speed USB Connectivity & Flash Memory

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, Midsize Display Data Logger, Midsize Display Logger, USB Logger, Dickson Data Logger, Dickson Display Logger, Dickson TM, Datalogger, Temperature and Humidity Data Logger, Memory Card, Alarm, Digital Display Logger, Temperature and Humidity Logger, Data Environment Logger, Flash Memory Card, Alarm, Two Channel Data Logger, Temperature Humidity Data Logger, Datalogger

Network Connectivity:
MP100

SD Memory Card:
Yes

RH Accuracy:
±2%

Temp. Accuracy:
0.8F
0.5C

Power:
Battery

Accessories:
R006 "AA" Alkaline battery
A015 DicksonWare™ Software Serial Download Cable
A016 DicksonWare™ Software USB Download Cable
A025 DicksonWare™ SECURE Software and Serial Download Cable (21CFR11 compliant)
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A210 Removeable FLASH Storage Device
A220 Card Reader Kit - Includes USB Memory Card Reader and One Flash Memory Card.
R157 AC Adapter
SW400 Logger Calibration Software
A060 Serial Download Cable Only
A061 USB Download Cable Only - 6FT
R065 Universal International AC Adapter

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Humidity Range:
0 - 95% RH

Humidity Sensor:
Monolithic IC Humidity Sensor

Humidity Accuracy:
±2% RH @ 77°F (25°C)

Remote Temperature Range:
-40 to +185°F (-40 to +85°C)

Temperature Sensor:
Thermistor

Temperature Accuracy:
±0.8F (±.5C) for a temperature between +20 to +120F (-7 to +49C) ; ±1.8F (±1C) for all other temperaure ranges

Dew Point Range (Calculated):
-22 to +122°F (-30 to +50°C)

Dew Point Accuracy (Calculated):
±3.6°F (±2°C) from 30 to 95% RH

Ambient Operating Conditions:
-4 to +158°F (-20 to +70°C); 0 to 95% RH non -condensing

Download Type:
USB, Serial or Standard Ethernet

Download Time:
1-Minute (USB); 3-Minutes (Serial); 2.0 Minutes (Ethernet)

Keypad Functions:
3 buttons with tactile feedback; Min/Max, Alarm, Save

Response Time:
1 minute to 63% of full scale, typical

Display:
Medium

Display Update Rate:
10 Seconds under battery power; 1 second under AC power.

Display Dimensions:
2.0" x 1.375"

Display Min/Max:
Yes

Resolution:
0.1° From 0.0 to 999.9; 1° over 1000

Power Source:
Battery (included/backup only), 1 9V; AC adapter (included)-(Input Voltage/Current: 120VAC/60Hz/16W; Output Voltage/Current: 9VDC/1A; Optional Universal International Adapter available

Power Status Indicator:
LCD Display

Input Connections:
Plugs directly into outlet; Output Connection: 3.5mm stereo plug; Length: 6 feet)

Battery Life (Avg):
3 Hours

Battery Backup:
Yes with AC Adapter

Memory:
EEPROM

Data Capacity:
32000
16-bit Samples

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 or 10 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Alarm:
Audio/Visual

Approvals:
CE

Calibration:
Standard Dickson Certificate of Calibration

User Calibration w/ SW400:
Yes

Available Calibration Options:
User: zero point, Factory: NIST traceable

Enclosure:
Polycarbonate

Mounting:
Wall mountable via keyhole slots

Remote Probe Dimensions:
Houses thermistor and RH sensor in polycarbonate plastic; 5.9" x 0.91" (15cm x 2.3cm); Cable Length: 6’ (2 meters)

Included Accessories:
Battery, instruction manual, AC Adapter

DicksonWare™ Software Minimum Version Required:
9.0 DicksonWare Secure Software Required

DicksonWare™ PC/Software Requirements:
Windows® 98, 2000, and XP; PC with 486 MHz or better microprocessor, 16MB RAM, 1 free COM (serial) port with dedicated interrupt or 1 USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
A025: 9 pin female D-shell to male 2.5mm stereo plug, 6 feet; A026: USB male series “A” plug to 5-pin male series “B” mini plug, 6’ (2 meters)

DicksonWare™ Computer Interface:
RS-232 serial (COM) port or USB

Units / Pkg:
1

Dimensions (Inches/cm):
4.0x3.0x1.6
10.2x7.7x3.9

Weight:
9 oz

IP Rating:
IP20

Warranty:
12-Month Limited

Key Features:
1.High/Low Alarm 2.Min/Max Display 3.High Speed USB Connectivity & Flash Memory

A.K.A.:
Data Logger, Midsize Display Data Logger, Midsize Display Logger, USB Logger, Dickson Data Logger, Dickson Display Logger, Dickson TM, Datalogger, Temperature and Humidity Data Logger, Memory Card, Alarm, Digital Display Logger, Temperature and Humidity Logger, Data Environment Logger, Flash Memory Card, Alarm, Remote Probe Data Logger, Remote Probe Logger, Two Channel Data Logger, Temperature Humidity Data Logger, Datalogger, Ethernet Connectivity, Network, Ethernet Data Logger

Remote Probe:
Yes

Network Connectivity:
Ethernet

Temperature Range:
-40 to 185F
-40 to 85C

SD Memory Card:
Yes

RH Accuracy:
±2%

Temp. Accuracy:
0.8F
0.5C

Power:
Battery

Accessories:
A025 DicksonWare™ SECURE Software and Serial Download Cable (21CFR11 compliant)
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
SW400 Logger Calibration Software
R157 AC Adapter
A060 Serial Download Cable Only
A061 USB Download Cable Only - 6FT
A870 7' Network Cable (category 5 ethernet cable)
A871 25' Network Cable (category 5 ethernet cable)
R007 9V Battery
R065 Universal International AC Adapter
A029 DicksonWare™ SECURE Software with Email Notification and USB Download Cable (21CFR11 compliant) For use with Models SM720, SM725 and TM725
A867 Probe Dust Filter

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Temperature Range:
-4 to 158F
-20 to 70C

Humidity Range:
0 - 95% RH

Temperature Accuracy:
±0.8F (±0.5C) over range +20 to +120F (-6 to +48C),±1.8F (±1.0C) < +20F (-6C) and > +120F (+48C)

Temperature Sensor:
Internal digital temperature sensor

Humidity Sensor:
Monolithis RH IC sensor

Humidity Accuracy:
±2% RH at 0% to 60% RH; ±3% RH at 60% to 95% RH, non-condensing

Ambient Operating Conditions:
-4 to 158F (-20 to 70C); 0 to 95%RH (non-condensing)

Display:
Small

Display Resolution:
1°F (1°C) 1%RH

Display Update Rate:
Every 20 Seconds

Display Min/Max:
Yes

Data Capacity:
32000
16-bit Samples

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Power Source:
123A Lithium; user replaceable

Battery Life (Avg):
1-year

Resolution:
0.1F
0.1C

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
User: zero point; Factory: NIST traceable

User Calibration w/ SW400:
Yes

DicksonWare™ Software Minimum Version Required:
11

Software Required:
A016

DicksonWare™ PC/Software Requirements:
Microsoft Windows® 98 or higher; PC w/ 486 MHz or faster microprocessor, 16 MB RAM, 1 free USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
USB male series "A" plug to 5-pin male series "B" mini plug, 6 ft (2 meters)

DicksonWare™ Computer Interface:
USB

Software Features:
Selectable Sample Interval, F/C Selectable, Wrap or Stop when Full, Delayed Start, Real Time Monitoring and Much More.

Download Time:
1-minute when logger is full

Dimensions (Inches/cm):
1.34x3.08x2.25
3.4x7.8x5.7

Weight:
4 oz

IP Rating:
IP20

Warranty:
12-Month Limited

Key Features:
1.One Year - User Replaceable Battery
2.Push-to-Start
3.Display

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, Pro Series Data Logger, Pro Logger, Pro Data Logger, Dickson Data Logger, Dickson Logger, Dickson SP, Datalogger, Temperature Data Logger, Temperature Logger, Data Environment Logger, Humidity Data Logger, Humidity Logger, High Temperature Data Logger, Datalogger, Push-to-Start, Display

Download Type:
USB

Temp. Accuracy:
0.8F
0.5C

Push to Start:
Yes

Digital Display:
Yes

Network Connectivity:
MP100

RH Accuracy:
±2%

Power:
Battery

Accessories:
A125 3V Lithium 123A
A016 DicksonWare™ Software USB Download Cable
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A715 Locking Wall Mount Case, Small
SW400 Logger Calibration Software
A061 USB Download Cable Only - 6FT

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Temperature Range:
-4 to 158F
-20 to 70C

Humidity Range:
0 - 95% RH

Temperature Accuracy:
±0.8F (±0.5C) over range +20 to +120F (-6 to +48C),±1.8F (±1.0C) < +20F (-6C) and > +120F (+48C)

Temperature Sensor:
Internal digital temperature sensor

Humidity Sensor:
Monolithis RH IC sensor

Humidity Accuracy:
±2% RH at 0% to 60% RH; ±3% RH at 60% to 95% RH, non-condensing

Ambient Operating Conditions:
-4 to 158F (-20 to 70C); 0 to 95%RH (non-condensing)

Display:
Small

Display Indicators:
Display Solid or Scrolling while logging
Display Flashes when unit is full or in Delayed Start mode. Display is blank when logger is off waiting for Push to Start.

Display Resolution:
1°F (1°C) 1%RH

Display Update Rate:
Every 20 Seconds

Display Min/Max:
Yes

Data Capacity:
32000
16-bit Samples

Sample Interval:
Records data in configurable 1 second to 24 hour intervals, in 1 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Power Source:
123A Lithium; user replaceable

Battery Life (Avg):
1-year

Resolution:
0.1F
0.1C

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
User: zero point; Factory: NIST traceable

User Calibration w/ SW400:
Yes

DicksonWare™ Software Minimum Version Required:
13.6

Software Required:
A016

DicksonWare™ PC/Software Requirements:
Microsoft Windows® 98 or higher; PC w/ 486 MHz or faster microprocessor, 16 MB RAM, 1 free USB root hub, CD drive, VGA monitor or better

DicksonWare™ Cable Type/Length:
USB male series "A" plug to 5-pin male series "B" mini plug, 6 ft (2 meters)

DicksonWare™ Computer Interface:
USB

Software Features:
Selectable Sample Interval, F/C Selectable, Wrap or Stop when Full, Delayed Start, Press to Start, Real Time Monitoring and Much More.

Download Time:
1-minute when logger is full

Dimensions (Inches/cm):
1.34x3.08x2.25
3.4x7.8x5.7

Weight:
4 oz

IP Rating:
IP20

Warranty:
12-Month Limited

Key Features:
1.One Year - User Replaceable Battery
2.Start/Stop
3.Display

A.K.A.:
Data Logger, Computers, Hardware, Test Equipment, Pro Series Data Logger, Pro Logger, Pro Data Logger, Dickson Data Logger, Dickson Logger, Dickson SP, Datalogger, Temperature Data Logger, Temperature Logger, Data Environment Logger, Humidity Data Logger, Humidity Logger, High Temperature Data Logger, Datalogger, Push-to-Start, Display, Start/Stop Logger

Download Type:
USB

Temp. Accuracy:
0.8F
0.5C

Digital Display:
Yes

RH Accuracy:
±2%

Power:
Battery

Start/Stop:
Yes

Accessories:
A125 3V Lithium 123A
A016 DicksonWare™ Software USB Download Cable
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
A715 Locking Wall Mount Case, Small
SW400 Logger Calibration Software
A061 USB Download Cable Only - 6FT

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation

Temperature Range:
-4 to 158F
-20 to 70C

Temperature Accuracy:
±1.8F (±1C) over range -4 to +158F (-20 to +70C)

Temperature Sensor:
Digital Sensor

Humidity Range:
0 to 95% RH

Humidity Accuracy:
±2% RH (non-condensing) at 73°F (23°C)

Humidity Sensor:
Digital Sensor

Ambient Operating Conditions:
-4 to +158°F (-20 to +70°C), 0 to 95% RH (non-condensing)

Data Capacity:
7936
16-bit Samples

Sample Interval:
Records data in configurable 10 second to 24 hour intervals, in 10 second increments.

Sample Storage Rate:
Storage rate until logger is full may vary, dependent upon selected Sample Interval.

Power Source:
3V lithium battery (user replaceable)

Battery Life (Avg):
1-year

Memory:
EEPROM

Response Time:
10 minutes to 63% full scale

Download Time:
30-seconds, typical with logger full

Calibration:
Standard Dickson Certificate of Calibration

Available Calibration Options:
User: none, Factory: NIST traceable

Software Required:
A016 or A026

DicksonWare™ Software Minimum Version Required:
15.5.0

DicksonWare™ PC/Software Requirements:
Microsoft Windows® 95, 98, 2000, NT or XP; PC w/ 386 MHz or faster microprocessor, 4 MB RAM, 1 free COM (serial) port, CD drive

DicksonWare™ Cable Type/Length:
USB, 6’ long

DicksonWare™ Computer Interface:
USB

Approvals:
CE

Enclosure:
Polycarbonate

Units / Pkg:
12

Dimensions (Inches/cm):
1.75x1.4x0.62
4.4x3.5x1.6

Weight:
0.44 oz
12.4g

IP Rating:
IP20

Included Accessories:
Battery

Warranty:
12-Month Limited

Accuracy:
±1.8F
(±1C)

Key Features:
1.Less than $84 each
2.Slightly larger than a quarter

A.K.A.:
Computers, Hardware, Test Equipment, Dickson TK, Dickson Data Logger, Dickson Logger, Datalogger, Temperature and Humidity Data Logger, Temperature and Humidity Logger, Data Environment Logger, Transportation Logger, Portable Logger, Datalogger

RH Accuracy:
±2%

Temp. Accuracy:
1.8F
1.0C

Power:
Battery

Accessories:
A016 DicksonWare™ Software USB Download Cable
A026 DicksonWare™ SECURE Software and USB Download Cable (21CFR11 compliant)
SW701 DicksonWare™ Upgrade
A124 3V for USB Pro Series CR2450

Available Calibrations:
N100 NIST Traceable Calibration 1-pt. (Per New Unit)
N300 NIST Traceable Calibration 3-pt. (New Unit)
N400 A2LA Accredited Calibration 3-pt. (New Unit)
N520 Certificate of Validation